***Products may differ slightly to images
80m² Water Underfloor Heating Kit - 4 Zone System
- 1 High Output 3 Speed A-rated Grundfoss 15/60 Circulation Pump
- 1 Automatic Water Temperature Control Mixing Valve
- 1 4 Port Manifold, Fill & Drain Valve Pair, Ball Valve Pair
- 1 Heatmiser Digital Slimline Thermostat
- 1 400m Roll Of 16mm PEX-AL-PEX Multilayer Pipe
- 1 50m Edge Insulation Pack
- 1 Pipe Reaming Tool
- 600 60mm High Barbed Pipe Clips to secure your pipe to the flooring / insulation
- 8 16mm Pipe Connector Cores
- 1 Pipe Cutter
Only 25 Left!Inc. VAT
Very helpful team. Products were spot on exactly as described
You May Also Need (3)
Our 80sqm kit comes with everything required for a competent home DIY individual or skilled underfloor heating installer to complete the fitting easily. The 80sqm multi-zone underfloor heating kit is an ideal solution for heating up to 4 individual zones in your home, as well as allowing each to have an individual thermostat fitted if desired (the kit comes with 1 thermostat as standard).
If you intend to install this kit on joists across a suspended floor you will need to buy additional aluminium spreader plates also.
This kit will provide 80sqm of coverage and comes with all the materials and connections for quick and easy installation.
Underfloor heating is fast becoming the heating choice of the many, and in most cases is much more cost effective than the traditional radiator. Be the envy of your friends, choose an affordable, cost effective solution to heat your next room
Floor Coverage - 60sqm – 120sqm
60sqm at 150mm pipe spacing - Close spacing for conservatory and high heat loss areas in your home.
80qm at 200mm pipe spacing - Recommended spacing for even heat coverage in rooms with regulated temperatures- this is the most common use for this kit.
120sqm at 300mm pipe spacing - Ideal as a background heat source alongside a radiator system or to give your home that little extra warmth
Number Of Zones: 4
The 4 port manifold and actuators allows control and flow to 4 separate zones/rooms. Please upgrade at checkout if you would prefer a manifold with a different number of ports
Should you wish to control the zones independently please select the upgrade option to include electrothermic actuators and a Heatmiser UH4 wiring centre, giving you full flexibility across each pipe loop.
Main Underfloor Components
We only use top quality components in our water underfloor heating kits. Each kit comes with an A-rated pump, Pex-Al-Pex piping and Heatmiser programmable thermostat.
PEX-AL-PEX piping is a coextruded cross-linked polyethylene composite pressure pipe with a welded aluminium tube reinforcement between the inner and outer layers. The inner and outer cross-linked polyethylene layers are bonded to the aluminium tube by a melt adhesive. It is used for plumbing, hydronic heating and cooling, and snow and ice melting systems as well as all of our Wet Underfloor kits.
The WRAS approved Pex-Al-Pex pipe supplied with your Underfloor Heating Kit is made formed from 5 layers. two layers of plastic, two layers of adhesive and a layer of Aluminium in the core, these layers are what allow Pex-Al-Pex to outperform alternative materials.
Benefits of Pex-Al-Pex
- Safety of potable water and long-term reliability
- Resistance to corrosion, tuberculation, deposits
- Flexibility combined with stiffness to hold its shape
- Less linear longitudinal thermal expansion/contraction than standard PEX
- Aluminium layer prevents oxygen from permeating into pipe
- No flame used for joining, many fitting and joining options
- Durability and toughness to survive job site installations
- Lightweight, compact, easy to transport
Heatmiser are the market leaders in the manufacture of underfloor heating thermostats and are used by many of the UK’s underfloor heating manufacturers and are supplied as part of all of our full systems.
Water Underfloor Heating Kit Guarantees
The Rifeng components within our underfloor heating kits such as the pipes, manifolds and fittings all come with an insurance backed 25 year guarantee whilst the Grundfos pumps and Heatmiser products are covered for 2 years.
All our kits are usually shipped next day if ordered before 13:00. We do have huge stocks of all of our components but need to let you know that next day delivery is not guaranteed as sometimes we may need to order parts in. We do our best to get everything out to our customers as quickly as possible though and if there are any delays we will be sure to let you know