You May Also Need (1)
UFH 200w/m2 Electric Underfloor Heating Mat kits are perfect for use as the only source of heating in your home although historically made for use in conservatories, orangeries and other areas of high heat loss.
This Electric Underfloor Heating mat kit consists of a thin heating cable which is attached to the UFH sticky back mesh and spaced at the correct mm spacing for the desired W/m2 output.
200w/m2 is our highest heat output per m2 and warm up times can be up to 25% faster than 150w systems. We currently only stock 200w/m2 kits as these are the best and the fastest out there and at prices cheaper than lesser kits why sell anything else?
Our electric kits do not come with Thermostats but this can be added by selecting one from the additional items below.
This kit is a 1sqm kit and is designed for areas of 1sqm only.
Our kits use only the highest quality cable and is attached to a stick fibre glass mesh for easy installation and to ensure the desired heat output is obtained.
The system uses a series type heating cable with a twin conductor and a cold lead of 2m at one end.
The resistance heating wire is enclosed in an initial fluoropolymer insulation layer, which is itself wrapped in a protective metal shielding, before being encased in a final plastic outer sheath. The final diameter of the twin conductor cable is 2mm.
- Can be laid on any type of floor
- Easy to install
- Can be used as the sole heating source
- Warms up 25% faster than 150w systems
- Meets all test requirements of IEC 60335
- CE certified by SGS